First post: Questions regarding ALTEC 612 enclosure - DIY

[Altec Best]

I will measure and measure the braces for you if you can wait till tonight ?

Ok here are the brace measurements..

Side Braces: 30" x2-3/4" x 1" thick all braces measure 1" thickness. Three quarter stock is too skinny.

Back Brace : 33"x 2-3/4" x 1"
Front to Back: 17" x 2-3/4" x 1"

Port measures 7-3/4" x 3"

The bevel goes to 3/8" and not the 1/8" I previously posted.And 1/2" from opening on the face of baffle to the cut.

Hope this helps you.